Somfy ® LT50 roller shutter motor Ø50mm - switch control

Power options

The LT50 motor replacement kit + adapters are available in 7 motor strengths:

• 6 Nm (Somfy ARIANE 1032049 - 6/17)
• 10 Nm (Somfy JET 1037061 - 10/17)
• 20 Nm (Somfy METEOR 1041055 - 20/17)
• 25 Nm (Somfy GEMINI 1043036 - 25/17)
• 35 Nm (Somfy APOLLO 1047025 - 35/17)
• 40 Nm (Somfy MARINER 1049064 - 40/17)
• 50 Nm (Somfy VECTRAN 1051028 - 50/12)

The general ratio for motor power is 1Nm lifts 2Kg, you can estimate your shutter curtain weight with the below formula:

width (m) x height (m) x weight* (per m2)

* PVC: 4kg/m² or ALU: 4.5kg/m²

Motor speed

We offer several different RPM options. This choice is important, it directly refers to the lifting or lowering speed. It is the number of rotations on itself that the engine is capable of doing over a minute of time. Thus, the higher the number of rotations per minutes, the faster the openings and closings. If this is not an essential criterion, do not hesitate to opt for the 12rpm, as it is the most economical.

Reliable 

• 46 turn capacity cage
• Very fast stop limit switch adjustment, simply by pressing the pushbuttons (switch / inverter)
• Installable on all types of roller shutters (Traditional, Renovations or Tunnels)
• Made for use in a tube in a horizontal position.
• Supplied with a white 4-conductor WF cable of 2.50m. Removable connector with axial or radial cable outlet. For intermittent use.

Accessories

Options for the most common wheel & crown adapters are available to add to your motor kit.

If your tube model does not match any of them, many other adaptation models are available sold seperately on the site.

Note: The choice of adapters offered in the LT50 motor replacement kit cannot be interchanged.

Package contents

• LT50 motor of the specified Nm
• Wheel and crown adapter set
• User manual