AvosDim motorisation kit

Is it time to modernise your manual domestic roller shutter? AVOSDIM now offer a complete and simple solution in the form of an all-in-one remote control motor kit. After assembling the tube, simply open the roller box and replace the old tube with the new one and screw closed.

Check the below requirements to see if your shutter is compatible with the 10Nm remote control motor kit:

• Previous tube measures 40mm in diameter and is between 620mm and 1500mm wide
• Selected power is adequate (see formula below)

Weight of the slat curtain = width (m) x (height (m) + 0.2 x (weight per m² *)

* Estimated weight of the slats: PVC 4kg/m² - aluminum 4.5kg/m² - wood 11kg/m²

If your roller shutter weighs up to 20Kg, 10Nm power is suitable.

• 1 - Octagonal shaft ø40mm - recuttable W1500mm (x1)
• 2 - Ø40mm tube end with ball bearing (x1)
• 3 - Pivot plate with nipple ø12mm 75 x 75mm (x1)
• 4 - Motor support 005070
• 5 - Flexible slat attachment clips
• 6 - Remote RF motor ø35mm 005216 - W577mm - 10Nm (x1)
• 7 - Wheel and crown adapters for 40mm octagonal tube
• 8 - Stop limit adjustment stylus (x1)
• 9 - Self-drilling screws (x3)
• 10 - AVOSDIM remote 005203 (x1)

• Diameter: 35mm
• Motor strength: 10Nm
• Lift limit: 20kg
• Speed: 17rpm
• Power: 230V / 50Hz
• Cage capacity: 22 turns
• Protection index: IP44

AVOSDIM technology

AVOSDIM motor technlogy provides a reliable, good quality motor at an economical price. Modernising a manual roller shutter is easier than ever. Remote control AvosDim motors are compatible with a wide range of remote controls and automation clocks.